By / Jud Martell • Photos courtesy of SMWTC
A 2020 report would be remiss if it didn’t headline COVID-19, which defined all operational priorities in businesses across the globe. The Sheet Metal Industry Training Board (SMITB) was faced with significant challenges to support its apprentices and contractors, while prioritizing the safe delivery of technical training.
At the one-year mark in March 2021, we thanked our contractors for their diligence to keep our workforce safe on the job and for releasing apprentices for technical training when scheduled. Our industry continues to produce strong apprenticeship numbers, and our training centre continues with triple classes to meet the demand for technical training, while adhering to safety protocols.
Industry Forecast
According to the the BC Labour Market Outlook (2019 – 2029), average employment growth for sheet metal workers at 0.4 % up to 2024 with 91.3% of openings expected to replace retiring workers and 8.7% due to economic growth.
In its annual outlook survey, the Sheet Metal Journal found that contractors were “finding new and creative ways to engage the workforce (45%), investing in labour (24%), and implementing new technology, including tracking, estimating, AutoCAD, and other software (22%)”.
Sheet Metal Journal also reported that BC economists predict a slight rebound and moderate growth this year with BC on track for real GDP growth averaging 4.7 percent in 2021 and 4.9 percent in 2022. Construction will continue to drive the recovery, driven by residential and commercial projects, and government spending on infrastructure.
Apprentice Training & Specialty Training
The COVID-19 pandemic significantly impacted training offered at the Training Centre from March 2020 onwards when apprentice and specialty training was temporarily suspended. There were 41 students attending SMWTC at the time, and they were quickly transitioned to complete their training remotely. Staff transitioned to remote work while simultaneously reconfiguring our high touch, hands-on trades training facility to meet COVID-19 safety guidelines.
The pandemic expedited a situation already in the making—the digitization of part of the training centre’s training curriculum. A blended learning model was developed combining online theoretical and onsite technical training, made possible by an investment in IT infrastructure by the Board and Industry Training Institute (iTi).
The entire thirrd intake of 50 students had their classes cancelled in early 2020. When classes were scheduled to reconvene, the Training Centre prioritized students with the highest apprenticeship hours to seat assignments. In June 2020, we welcomed back our first class of 24 Level 4 apprentices and all excelled and passed the IP exam—a stellar result.
In fall of 2020, it was a daunting feat to deliver triple classes via blended learning model to meet the demand, while adhering to COVID-19 safety protocols. We extended the technical training by one week to provide additional instruction time for apprentices, and received additional funding from the Industry Training Authority (ITA) to support our efforts. All students were issued iPads and laptops for use while in training, and AutoCAD as a specialty training class enhanced the curriculum.
Apprentice Contests
The following apprentice contests scheduled in 2020 were cancelled due to the COVID-19 pandemic’s physical distancing requirements:
- BC Skills 2020 Provincial Competition (April 2020)
- Skills Canada 2020 – Vancouver (May 2020)
- The Canadian Contest (June 2020)
- SMWTC Annual Apprentice Contest (November 2020)
Subject to public health orders, we are hopeful the SMWTC Annual Apprentice Contest will be able to run this year with a tentative date of November 20, 2021.
Funding
The ITA adjusted the 2020-2021 fiscal year budget ($650,000) to address the COVID-19 pandemic and the additional weeks of instruction added to all technical training. Tuition was also increased $100 as a result of the additional week of training.
Our Technology and an Inclusive Workforce: Forging our Future Sheet Metal Industry Project is funded through the Union Training and Innovation Program (UTIP), a federal cost-sharing initiative developed to increase investment in training equipment and materials for higher quality training, leading to a more skilled and productive trade’s workforce. UTIP is also intended to improve the participation and success of key groups in trades training and careers, including women, Indigenous People, and newcomers to Canada.
SMITB’s UTIP project has been awarded $424, 213 over five years (2019–2024). In the fall of 2019 and spring 2020, SMITB purchased a mobile elevated work platform virtual reality (VR) simulator, advanced welding equipment, VR and augmented reality (AR) welding equipment, and fan service equipment offset by the federal government subsidies. Currently, we are negotiating with the funder for further equipment purchases subject to approval. Vancity also provided $500 in Community Grant funding in support of our UTIP Project participants; and, we received funding from the iTi in the amount of $22,000 USD, to purchase of computers and AutoCAD software to assist apprentices in gaining greater digital literacy in online tools.
In addition, the following in-kind contributions were received in 2020:
- Milwaukee – educational tools program
- Microsoft – MS office suite software for students
- AutoDesk – student versions of AutoCAD software
Staff And Facility
The Training Centre continues to be an industry leader by building on the COVID-19 pandemic as an opportunity for innovation, adaptation, and increased digital literacy skills, not only for our apprentices but also for our staff. In 2021, we brought on part-time instructors Scott Wilcox from Spectrum Sheet Metal Ltd. and Matt Cleary from Austin Metal Fabricators LP to assist in the delivery of technical training. We appreciate their contractors for exercising flexibility in allowing them to take time off to work for the Training Centre.
The SMWTC welcomed Astrid de la Tour de Saint Ygest as its new office administrator in April, and Heather Brown has taken on an additional day per week to support intake coordination of new applicants to meet the growing demand.
The training centre is also pleased to announce it is expanding with the purchase of a new training facility in Langley, as of June 15, 2021. Watch for the expansion of class offerings in the fall/winter 2021/22 to meet the increasing demand for apprenticeship technical training. The team hopes to relaunch its specialty training once the new training facility is operational.
It is important to note that there was no increase in the provincial budget for technical training in BC. The SMWTC’s existing COVID-19 funding model was negotiated up to August 31, 2021; however, at this time additional funding allocations are not anticipated for the remainder of the fiscal year (March 31, 2022).
Moving Forward
As we continue to navigate these uncharted waters impacted by the ongoing COVID-19 pandemic, we will see where the end of 2021 takes us. 2020 will certainly go down in the records as one of the most memorable years, in terms of tremendous change and incredible opportunity, and 2021 is presenting a similar path. We have all faced our own experiences with COVID-19, both professionally and personally, and we hope you continue to be safe and healthy in these interesting times. ■
